

DC Water Pumps with Skimmer Impeller
from $79.98
Silent Operation
Safe, Low Voltage
Digital Control
Safety Auto Shut Off
SR Aquaristik DC Electronic Adjustable Flow Skimmer Pumps are the complete solution for returning water from your sump back to the aquarium, or for running external components like protein skimmers. This unique energy-efficient design reduces maintenance and produces less heat than traditional motor driven pumps. The pump is ideal for aquarium use; its ceramic shaft will prevent wear caused by small debris that will destroy traditional stainless steel shafts. Because the pump has only one moving part, there are less things that can go wrong with it.
Please note that this pump comes only with a Skimmer Impeller. This pump is backed by a three-year warranty and can be easily made like-new with a replacement impeller kit.
**IMPORTANT INFORMATION WHEN SETTING UP** Click Here for Instruction Manual
DC 300 & 500 Pump Fittings
1 x 1/2" Barb Fitting
1 x 3/4" Barb Fitting
2 x 1/2 Slip Fitting
DC 1000, 1500, 3000 Pump Fittings
1 x 3/4" Barb Fitting
1 x 1" Barb Fitting
2 x 1" Slip Fitting


Pro Skim 80 In-Sump Protein Skimmer
$249.98
Simple to set up and operate
Extremely efficient
Quality construction
Quick and Precise adjustment valve allows fast precision tuning of the skimmer water level to control wet/dry foam production
Bubble chamber maximizes contact time allowing for efficient skimming
Cone construction maximizes skimming effect
Product Description:
The SR Aquaristik PRO Skim 80 In-Sump Protein Skimmer quickly removes organic waste from saltwater aquarium water. A powerful needle wheel impeller pump creates ideal sized air bubbles that force organic protein into a collection cup for easy removal. The SR PRO Skim 80 is recommended for aquariums from 50-80 gallons. SR PRO Skim 80 Skimmers are built using flame polished cell-cast acrylic. The SR Protein Skimmer is equipped with bubble plates, modified cone necks, air silencers and needle wheel impellers for maximum performance and quiet operation. They also have minimized footprints to make installation as easy as possible in smaller sumps.
Product Specification
Filtration Rating: up to 80 Gallons with a light bio-load or 50 Gallons with a heavy bio-load
Footprint: 8”/20cm
Height: 15.5”/39.5cm
Max chamber diameter: 5 3/4” / 14.5cm
Outlet size: 1” quick-precise adjustment valve
DC Pump included
Pump power consumption: 18W
Controller included
Requires approximately 3/4” / 2cm of clearance to remove the collection cup
Recommendations for Use:
We recommend running the Pro Skim 80 between 8 and 10 inches below the waterline. If your sump is deeper, we normally use PVC spacers made by simply cutting 1½" PVC pipe to the appropriate length and placing them under the base of the skimmer.
Set Up:
Click Here for Instruction Manual
Product Video:


Pro Sump 80 Filtration Kit
$549.98
This complete filtration kit is ideal for reef aquariums up to 80 gallons and features an amazing selection of high quality and stylish components.
Buy Now and receive a free Fragging Tool Kit - Retail Value $69.98
Comes complete with the following components:
SR Aquaristik Pro Sump 80
SR Aquaristik Pro Skim 80
SR Aquaristik 1000 GPH Adjustable Flow DC Pump
12’ of Kink Free Pipe
SR Aquaristik Pro Sump 80
The SR Aquaristik Pro Sump 80 was designed to combine functionality, design, and style in one convenient package. This quality sump will exceed the expectations of the most demanding aquarium enthusiast.
Features and Dimensions:
Skimmer Chamber: L 18” 46cm x W 9 ¾” 25cm
Return Chamber: L 11” 28cm x W 4 ¾” 11cm
Filter Socks: x 1
Auto Top Off Bracket: x 1
Drain 1: 1" x 1” Drain 2: 1" x ¾”
Overall Footprint: L 20” 50cm x W 17 ¾” 46cm x H 15” 38cm
SR Aquaristik Pro Skim 80
The SR Aquaristik PRO Skim 80 In-Sump Protein Skimmer quickly removes organic waste from saltwater aquarium water. A powerful needle wheel impeller pump creates ideal sized air bubbles that force organic protein into a collection cup for easy removal. The SR PRO Skim 80 is recommended for aquariums from 50-80 gallons. SR PRO Skim 80 Skimmers are built using flame polished cell-cast acrylic. The SR Protein Skimmer is equipped with bubble plates, modified cone necks, air silencers and needle wheel impellers for maximum performance and quiet operation. They also have minimized footprints to make installation as easy as possible in smaller sumps.
Product Specification
Filtration Rating: up to 80 Gallons with a light bio-load or 50 Gallons with a heavy bio-load
Footprint: 8”/20cm
Height: 15.5”/39.5cm
Max chamber diameter: 5 3/4” / 14.5cm
Outlet size: 1” quick-precise adjustment valve
DC Pump included
Pump power consumption: 18W
Controller included
Requires approximately 3/4” / 2cm of clearance to remove the collection cup
SR Aquaristik 1000 GPH Adjustable Flow DC Pump
SR Aquaristik Adjustable Flow DC Water Pump is the complete solution for returning water from your sump back to the aquarium, or for running external components like protein skimmers. This unique energy-efficient design reduces maintenance and produces less heat than the traditional motor driven pump. This pump is ideal for aquarium use; its ceramic shaft will prevent wear caused by small debris that will destroy traditional stainless steel shafts. Because this pump has only one moving part, there are less things that can go wrong with it.
This pump is backed by a three-year warranty and can be easily made like-new with a replacement impeller kit.
12' Kink Free Pipe
Kink-Free Pipe is ideal for recirculating water without the use of PVC cement. The internal spiral prevents crushing while the smooth inner wall reduces friction and maximizes water flow. Kink-Free Pipe provides durability and flexibility, making installations quick and easy in a wide variety of applications. Kink-Free Pipe works best when used with traditional barbed fittings and stainless steel hose clamps to form water-tight seals.


Pro Skim 150 In-Sump Protein Skimmer
$349.98
Simple to set up and operate
Extremely efficient
Quality construction
Quick and Precise adjustment valve allows fast precision tuning of the skimmer water level to control wet/dry foam production
Bubble chamber maximizes contact time allowing for efficient skimming
Cone construction maximizes skimming effect
Product Description:
Ideal for aquariums up to 150 gallons, the SR Aquaristik PRO Skim 150 In-Sump Protein Skimmer quickly removes organic waste from saltwater aquarium water. A powerful needle wheel impeller pump creates ideal sized air bubbles that force organic protein into a collection cup for easy removal. The SR PRO Skim 150 is recommended for aquariums from 80-150 gallons. SR Aquaristik SR PRO 150 Skimmers are built using flame polished cell-cast acrylic. The SR Skimmer is equipped with bubble plates, modified cone necks, air silencers and needle wheel impellers for maximum performance and quiet operation. They also have minimized footprints to make installation as easy as possible in smaller sumps.
Product Specification
Filtration Rating: up to 150 Gallons with a light bio-load or 80 Gallons with a heavy bio-load
Footprint: 9” / 23.5cm
Height: 20 1/2” / 52.5cm
Max chamber diameter: 6 1/4” / 16.5cm
Outlet size: 1 1/4” quick-precise adjustment valve
DC Pump included
Pump power consumption: 18W
Controller included
Requires approximately 3/4” / 2cm of clearance to remove the collection cup
Recommendations for Use:
We recommend running the Pro Skim 150 between 8 and 10 inches below the waterline. If your sump is deeper, we normally use PVC spacers made by simply cutting 1½" PVC pipe to the appropriate length and placing them under the base of the skimmer.


Media Reactor 120 Kit
$179.98
SR Aquaristik Media Reactor 120 Kit
This complete set up is ideal for tumbling most chemical filter media such as Activated Carbon and/or Granular Ferric Oxide (GFO) in the aquarium. Ideal for Aquariums up to 120 gallons.
Kit Includes:
SR Aquaristik Media Reactor 120
SR Aquaristik DC 300 Water Pump
4 ft 5/8" Hosing
SR Aquaristik Media Reactor 120
Built with quality materials
Simple to set up
Efficient up flow design
How It Works
SR Aquaristik Media Reactor 120 is an aquarium filtration device that contains filter media. It helps to increase the effectiveness of the filter media inside by forcing all water that enters the reactor to come in contact with the media.
SR Aquaristik DC 300 Water Pump
Silent Operation
Safe, Low Voltage
Digital Control
Safety Auto Shut Off
SR Aquaristik DC Water Pumps are the complete solution for returning water from your sump back to the aquarium, or for running external components like protein skimmers. This unique energy-efficient design reduces maintenance and produces less heat than traditional motor driven pumps. The pump is ideal for aquarium use; its ceramic shaft will prevent wear caused by small debris that will destroy traditional stainless steel shafts. Because the pump has only one moving part, there are less things that can go wrong with it.
This pump is backed by a three-year warranty and can be easily made like-new with a replacement impeller kit.
Pump Model: 300DCPower Voltage: 24vAmperage: 1 AMax. Wattage: 20wMax. Height: 9.84 ftMax. Flow: 300 gal/h


Pro Sump 150 Filtration Sump
$339.98
$399.98
Quality acrylic construction
Built in filter sock holders
Adjustable water level adjustment
The SR Aquaristik Pro Sump 150 was designed to combine functionality, design and style in one convenient package. This quality sump will exceed the expectations of the most demanding aquarium enthusiast.
Quality acrylic construction
Built in filter sock holders
Adjustable water level adjustment
Easy access compartments
Reinforced Upper and Bottom Rim
Pump and skimmer control mounts
Features and Dimensions:
Skimmer Chamber: L 14 ½” 36cm x W 9 ½” 24cm
Return Chamber: L 14 ½” 36cm x W 4 ½” 11cm
Filter Socks: x 1
Refugium: L 8 ¾” 22.5cm x 5” 13cm
Auto Top Off Bracket: x 1
Drain 1: 1” x 1” Drain 2: 1” x ¾”
Overall Footprint: L 23 ¾” 60cm x W 17 ¾” 45cm x H 15” 38cm


Pro Sump 400 Filtration Sump
$424.98
$499.98
Quality acrylic construction
Built in filter sock holders
Adjustable water level adjustment
The SR Aquaristik Pro Sump 400 was designed to combine functionality, design and style in one convenient package. This quality sump will exceed the expectations of the most demanding aquarium enthusiast.
Quality acrylic construction
Built in filter sock holders
Adjustable water level adjustment
Easy access compartments
Reinforced Upper and Bottom Rim
Pump and skimmer control mounts
Features and Dimensions:
Skimmer Chamber: L 14 ¾” 37cm x W 9 ½” 24cm
Return Chamber: L 10 ½” 36cm x W 5 ¾” 14.5cm
Filter Socks: x 2
Refugium: L 10 ¼” 26cm x 7” 18cm
Auto Top Off Bracket: x 1
Drain 1: 1” x 1” Drain 2: 1” x 1 ¾”
Overall Footprint: L 30” 76cm x W 17 ¾” 45cm x H 15” 38cm


Pro Sump 400 Filtration Kit
$1,019.98
This complete filtration kit is ideal for reef aquariums up to 400 gallons and features an amazing selection of high quality and stylish components.
Buy Now and receive a free Fragging Tool Kit - Retail Value $69.98
Comes complete with the following components:
SR Aquaristik Pro Sump 400
SR Aquaristik Pro Skim 400
SR Aquaristik 2000 GPH Adjustable Flow DC Pump
12’ of Kink Free Pipe
SR Aquaristik Pro Sump 400 Filtration Sump
The SR Aquaristik Pro Sump 400 was designed to combine functionality, design and style in one convenient package. This quality sump will exceed the expectations of the most demanding aquarium enthusiast.
Features and Dimensions:
Skimmer Chamber: L 14 ¾” 37cm x W 9 ½” 24cm
Return Chamber: L 10 ½” 36cm x W 5 ¾” 14.5cm
Filter Socks: x 2
Refugium: L 10 ¼” 26cm x 7” 18cm
Auto Top Off Bracket: x 1
Drain 1: 1” x 1” Drain 2: 1” x 1 ¾”
Overall Footprint: L 30” 76cm x W 17 ¾” 45cm x H 15” 38cm
SR Aquaristik Pro Skim 400
Ideal for aquariums from 200-400 gallons, the SR Aquaristik PRO Skim 400 In-Sump Protein Skimmer quickly removes organic waste from saltwater aquarium water. A powerful needle wheel impeller pump creates ideal sized air bubbles that force organic protein into a collection cup for easy removal. SR Aquaristik SR PRO 400 Skimmers are built using flame polished cell-cast acrylic. The SR Skimmer is equipped with bubble plates, modified cone necks, air silencers and needle wheel impellers for maximum performance and quiet operation. They also have minimized footprints to make installation as easy as possible in smaller sumps.
Product Specification
Filtration Rating: up to 400 Gallons with a light bio-load or 200 Gallons with a heavy bio-load
Footprint: 10 1/2”/27.5cm
Height: 21 1/2”/55.5cm
Max chamber diameter: 7 1/2”/19.5cm
Outlet size: 1 1/2” quick-precise adjustment valve
DC Pump included
Pump power consumption: 25W
Controller included
Requires approximately 3/4” / 2cm of clearance to remove the collection cup
SR Aquaristik 2000 GPH Adjustable Flow DC Pump
SR Aquaristik Adjustable Flow DC Water Pump is the complete solution for returning water from your sump back to the aquarium, or for running external components like protein skimmers. This unique energy-efficient design reduces maintenance and produces less heat than the traditional motor driven pump. This pump is ideal for aquarium use; its ceramic shaft will prevent wear caused by small debris that will destroy traditional stainless steel shafts. Because this pump has only one moving part, there are less things that can go wrong with it.
This pump is backed by a three-year warranty and can be easily made like-new with a replacement impeller kit.
12' Kink Free Pipe
Kink-Free Pipe is ideal for recirculating water without the use of PVC cement. The internal spiral prevents crushing while the smooth inner wall reduces friction and maximizes water flow. Kink-Free Pipe provides durability and flexibility, making installations quick and easy in a wide variety of applications. Kink-Free Pipe works best when used with traditional barbed fittings and stainless steel hose clamps to form water-tight seals.


PRO Skim 400 In-Sump Protein Skimmer
$449.98
Simple to set up and operate
Extremely efficient
Quality construction
Quick and Precise adjustment valve allows fast precision tuning of the skimmer water level to control wet/dry foam production
Bubble chamber maximizes contact time allowing for efficient skimming
Cone construction maximizes skimming effect
Product Description:
Ideal for aquariums up to 400 gallons, the SR Aquaristik PRO Skim 400 In-Sump Protein Skimmer quickly removes organic waste from saltwater aquarium water. A powerful needle wheel impeller pump creates ideal sized air bubbles that force organic protein into a collection cup for easy removal. The SR PRO Skim 400 is recommended for aquariums from 200-400 gallons.
SR Aquaristik SR PRO 400 Skimmers are built using flame polished cell-cast acrylic. The SR Skimmer is equipped with bubble plates, modified cone necks, air silencers and needle wheel impellers for maximum performance and quiet operation. They also have minimized footprints to make installation as easy as possible in smaller sumps.
Product Specification
Filtration Rating: up to 400 Gallons with a light bio-load or 200 Gallons with a heavy bio-load
Footprint: 10 1/2”/27.5cm
Height: 21 1/2”/55.5cm
Max chamber diameter: 7 1/2”/19.5cm
Outlet size: 1 1/2” quick-precise adjustment valve
DC Pump included
Pump power consumption: 25W
Controller included
Requires approximately 3/4” / 2cm of clearance to remove the collection cup
Recommendations for Use:
We recommend running the Pro Skim 400 between 8 and 10 inches below the waterline. If your sump is deeper, we normally use PVC spacers made by simply cutting 1½" PVC pipe to the appropriate length and placing them under the base of the skimmer.


Media Reactor 80 Kit
$159.98
SR Aquaristik Media Reactor 80 Kit
This complete set up is ideal for tumbling most chemical filter media such as Activated Carbon and/or Granular Ferric Oxide (GFO) in the aquarium. Ideal for aquariums up to 80 gallons.
Kit Includes:
SR Aquaristik Media Reactor 80
SR Aquaristik DC 300 Water Pump
4 ft 5/8" Hosing
SR Aquaristik Media Reactor 80
Built with quality materials
Simple to set up
Efficient up flow design
How It Works
SR Aquaristik Media Reactor 80 is an aquarium filtration device that contains filter media. It helps to increase the effectiveness of the filter media inside by forcing all water that enters the reactor to come in contact with the media.
SR Aquaristik DC 300 Water Pump
Silent Operation
Safe, Low Voltage
Digital Control
Safety Auto Shut Off
SR Aquaristik DC Water Pumps are the complete solution for returning water from your sump back to the aquarium, or for running external components like protein skimmers. This unique energy-efficient design reduces maintenance and produces less heat than traditional motor driven pumps. The pump is ideal for aquarium use; its ceramic shaft will prevent wear caused by small debris that will destroy traditional stainless steel shafts. Because the pump has only one moving part, there are less things that can go wrong with it.
This pump is backed by a three-year warranty and can be easily made like-new with a replacement impeller kit.
Pump Model: 300DCPower Voltage: 24vAmperage: 1 AMax. Wattage: 20wMax. Height: 9.84 ftMax. Flow: 300 gal/h


Pro Sump 150 Filtration Kit
$849.98
This complete filtration kit is ideal for reef aquariums up to 150 gallons and features an amazing selection of high quality and stylish components.
Buy Now and receive a free Fragging Tool Kit - Retail Value $69.98
Comes complete with the following components:
SR Aquaristik Pro Sump 150
SR Aquaristik Pro Skim 150
SR Aquaristik 1500 GPH Adjustable Flow DC Pump
12’ of Kink Free Pipe
SR Aquaristik Pro Sump 150
The SR Aquaristik Pro Sump 150 was designed to combine functionality, design and style in one convenient package. This quality sump will exceed the expectations of the most demanding aquarium enthusiast.
Quality acrylic construction
Built in filter sock holders
Adjustable water level adjustment
Easy access compartments
Reinforced Upper and Bottom Rim
Pump and skimmer control mounts
Features and Dimensions:
Skimmer Chamber: L 14 ½” 36cm x W 9 ½” 24cm
Return Chamber: L 14 ½” 36cm x W 4 ½” 11cm
Filter Socks: x 1
Refugium: L 8 ¾” 22.5cm x 5” 13cm
Auto Top Off Bracket: x 1
Drain 1: 1” x 1” Drain 2: 1” x ¾”
Overall Footprint: L 23 ¾” 60cm x W 17 ¾” 45cm x H 15” 38cm
SR Aquaristik Pro Skim 150
Ideal for aquariums up to 150 gallons, the SR Aquaristik PRO Skim 150 In-Sump Protein Skimmer quickly removes organic waste from saltwater aquarium water. A powerful needle wheel impeller pump creates ideal sized air bubbles that force organic protein into a collection cup for easy removal. The SR PRO Skim 150 is recommended for aquariums from 80-150 gallons. SR Aquaristik SR PRO 150 Skimmers are built using flame polished cell-cast acrylic. The SR Skimmer is equipped with bubble plates, modified cone necks, air silencers and needle wheel impellers for maximum performance and quiet operation. They also have minimized footprints to make installation as easy as possible in smaller sumps.
Product Specification
Filtration Rating: up to 150 Gallons with a light bio-load or 80 Gallons with a heavy bio-load
Footprint: 9” / 23.5cm
Height: 20 1/2” / 52.5cm
Max chamber diameter: 6 1/4” / 16.5cm
Outlet size: 1 1/4” quick-precise adjustment valve
DC Pump included
Pump power consumption: 18W
Controller included
Requires approximately 3/4” / 2cm of clearance to remove the collection cup
SR Aquaristik 1500 GPH Adjustable Flow DC Pump
SR Aquaristik Adjustable Flow DC Water Pump is the complete solution for returning water from your sump back to the aquarium, or for running external components like protein skimmers. This unique energy-efficient design reduces maintenance and produces less heat than the traditional motor driven pump. This pump is ideal for aquarium use; its ceramic shaft will prevent wear caused by small debris that will destroy traditional stainless steel shafts. Because this pump has only one moving part, there are less things that can go wrong with it.
This pump is backed by a three-year warranty and can be easily made like-new with a replacement impeller kit.
12' Kink Free Pipe
Kink-Free Pipe is ideal for recirculating water without the use of PVC cement. The internal spiral prevents crushing while the smooth inner wall reduces friction and maximizes water flow. Kink-Free Pipe provides durability and flexibility, making installations quick and easy in a wide variety of applications. Kink-Free Pipe works best when used with traditional barbed fittings and stainless steel hose clamps to form water-tight seals.


Pro Sump 80 Filtration Sump
$254.98
$299.98
Quality acrylic construction
Built in filter sock holders
Adjustable water level adjustment
The SR Aquaristik Pro Sump 80 was designed to combine functionality, design, and style in one convenient package. This quality sump will exceed the expectations of the most demanding aquarium enthusiast.
Quality acrylic construction
Built in filter sock holders
Adjustable water level adjustment
Easy access compartments
Reinforced Upper and Bottom Rim
Pump and skimmer control mounts
Features and Dimensions:
Skimmer Chamber: L 18” 46cm x W 9 ¾” 25cm
Return Chamber: L 11” 28cm x W 4 ¾” 11cm
Filter Socks: x 1
Auto Top Off Bracket: x 1
Drain 1: 1" x 1” Drain 2: 1" x ¾”
Overall Footprint: L 20” 50cm x W 17 ¾” 46cm x H 15” 38cm


Pro Skim Commercial Protein Skimmer
$3,999.98
Energy efficient DC mixing pumps
Quality cast acrylic
Includes barbed fittings
Product Description:
Ideal for Public Aquariums, Coral Propagation, and Large Home Aquariums, the SR Aquaristik PRO Skim Commercial Protein Skimmer quickly removes organic waste from saltwater aquarium water. A powerful needle wheel impeller pump creates ideal sized air bubbles that force organic protein into a collection cup for easy removal. The SR PRO Skim Commercial is recommended for aquariums from 600 gallons and up.
SR Aquaristik SR PRO Skim Commercial Skimmers are built using flame polished cell-cast acrylic. The SR Skimmer is equipped with bubble plates, modified cone necks, air silencers and needle wheel impellers for maximum performance and quiet operation. They also have minimized footprints to make installation as easy as possible in smaller sumps.
Product Specification
Outlet size: 1 1/2” quick-precise adjustment valve
DC Pump included
Controller included


Pro Skim 600 In-Sump Protein Skimmer
$649.98
Simple to set up and operate
Extremely efficient
Quality construction
Quick and Precise adjustment valve allows fast precision tuning of the skimmer water level to control wet/dry foam production
Bubble chamber maximizes contact time allowing for efficient skimming
Cone construction maximizes skimming effect
Product Description:
Ideal for aquariums up to 600 gallons, the SR Aquaristik PRO Skim 600 In-Sump Protein Skimmer quickly removes organic waste from saltwater aquarium water. A powerful needle wheel impeller pump creates ideal sized air bubbles that force organic protein into a collection cup for easy removal. The SR PRO Skim 600 is recommended for aquariums from 400-600 gallons.
SR Aquaristik SR PRO 600 Skimmers are built using flame polished cell-cast acrylic. The SR Skimmer is equipped with bubble plates, modified cone necks, air silencers and needle wheel impellers for maximum performance and quiet operation. They also have minimized footprints to make installation as easy as possible in smaller sumps.
Product Specification
Filtration Rating: up to 600 Gallons with a light bio-load or 400 Gallons with a heavy bio-load
Footprint:
Height:
Max chamber diameter:
Outlet size: 1 1/2” quick-precise adjustment valve
DC Pump included
Pump power consumption:
Controller included
Requires approximately 3/4” / 2cm of clearance to remove the collection cup
Recommendations for Use:
We recommend running the Pro Skim 600 between 8 and 10 inches below the waterline. If your sump is deeper, we normally use PVC spacers made by simply cutting 1½" PVC pipe to the appropriate length and placing them under the base of the skimmer.